ComAp InteliMains 210 BTB User Manual

InteliMains 210 Global Guide
265
Setpoint group CM-RS232-485 Related FW 2.0.0
Range [units] 9600 / 19200 / 38400 / 57600 / 115200 [bps]
Default value 9600 bps Alternative config NO
Step [-]
Comm object 24420 Related applications MCB, MGCB, BTB
Description
If the MODBUS mode is selected on COM2 channel, the MODBUS communication speed can be adjusted
here.
COM2 MODBUS Communication Speed
6 List of setpoints (page 165)
Group: CM-GPRS
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] Email+SMS / SMS Only [-]
Default value Email+SMS Alternative config NO
Step [-]
Comm object 24315 Related applications MCB, MGCB, BTB
Description
This setpoint adjust the communication mode of module.
Email+SMS
Controller is connected to the Internet and is able to send e-mails as well as SMS. The
controller is also accessible via AirGate. Internet-enabled SIM card must be used. Also
APN Name (page 275) has to be adjusted.
SMS Only Only SMS are sent. Internet-enabled SIM card is not required.
IMPORTANT: When this setpoint is changed the controller has to be restarted to apply
changes.
Mode
6 List of setpoints (page 165)
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24363 Related applications MCB, MGCB, BTB
Description
APN (Access Point Name) of the GPRS/4G network, provided by GSM operator.
APN Name
6 back to List of setpoints

ComAp InteliMains 210 BTB Specifications

General

Brand	ComAp
Model	InteliMains 210 BTB
Category	Controller
Language	English