ComAp InteliMains 210 BTB User Manual

InteliMains 210 Global Guide
278
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24313 Related applications MCB, MGCB, BTB
Description
Use this setpoint to enter the username for the SMTP server. Leave the setpoint blank if the SMTP server
does not require authentication.
SMTP User Name
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] 0..15 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24312 Related applications MCB, MGCB, BTB
Description
Use this setpoint to enter the password for the SMTP server. Leave the setpoint blank if the SMTP server
does not require authentication.
SMTP User Password
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value airgate.comap.cz:9925 Alternative config NO
Step [-]
Comm object 24311 Related applications MCB, MGCB, BTB
Description
This setpoint is used for entering the domain name (e.g. smtp.yourprovider.com) or IP address (e.g.
74.125.39.109) or number of port (with colon like a first mark) of the SMTP server. Ask your internet provider
or IT manager for this information.
Note: You may use also any public SMTP server which does not require connection over SSL/TLS
channels. If the device is connected to AirGate the AirGate SMTP server at "airgate.comap.cz" may be
used. Ports 25 and 9925 are supported. After controller connects to AirGate for the first time (or with new
public IP address), it may not be able to send emails for first 5-10 minutes.
SMTP Server Address
6 back to List of setpoints

ComAp InteliMains 210 BTB Specifications

General

Brand	ComAp
Model	InteliMains 210 BTB
Category	Controller
Language	English