Comdial DX-80 - System Criteria and Capacity

Overview
30 Comdial October, ‘03
1.15.2 SYSTEM CRITERIA AND CAPACITY
Time slots PCM - 32 time slots x 4 Highways (128 voice channels)
TDM 64 Time Slots (data processing)
Customer database memory
protection
300 hours via on-board lithium battery (no charging required)
Ports:
CO/PBX/Centrex Lines
Digital Stations
Standard Single Line
Telephones
16
48
16 Note: 32 total possible digital extensions in this configuration.
DTMF Receivers: One dedicated per single line telephone port
DTMF Senders: Unlimited. (DTMF signal generation is derived from the core system
tone resource. Tone combinations are available as needed.)
Tone Detectors: (used to
monitor call progress tones;
Busy Tone, Ring-back Tone,
etc.)
2 (shared for advanced call processing system features; DISA, ECF,
ABR. etc.)
Contacts 1 LBC can be programmed as associated to a CO line or dialed by an
extension to actuate the contact
Conference circuits 8 - 4 party conference circuits
DISA circuits Any number of CO lines may be programmed for DISA operation.
(AAM required for operation.)
System Attendants 1 Attendant + 1 alternate per tenant group
Tenant Groups 3
UCD/Hunt Groups:
Members per group:
Group Types:
Hunting Method:
24
24
UCD or Voice Announce
Linear, All Ring or Distributed