October, ‘03 Comdial 79
DX-80 Installation & Maintenance
3.5.3 PASS-THROUGH COMMUNICATIONS WITH CORPORATE OFFICE DX
Pass-through Communications is a feature associated with the Corporate Office DX 7270C hard drive
voice mail board. This feature allows you to communicate with the DX-80 or the in-skin voice mail
system through a single modem number. There are specific setup procedures required to activate this
feature. Refer to Comdial publication IMI72-005 for further information.
3.5.4 PC-DBA CONTROL MENU
At the bottom of the PC-DBA screen, special control functions of PC-DBA are shown. The following
line/bar can be found at the bottom of the display:
Use the associated “F” (Function) keys on the PC keyboard to access the various operations. The func-
tions and their specific operation are detailed in the following sections.
3.5.4.1 F1 - Help
Press F1 to view the help menu of PC-DBA. There are two help screens. Use the Page Down key to
move to the second screen.
3.5.4.2 F2 - A-Save
This function key is used to save the database to the PC automatically. For details on using this
function key, refer to the DX-80 Technical Manual: Volume II, Programming.
3.5.4.3 F2 - U-Save
This function key is used to save the database to the PC manually. For details on using this function
key, refer to the DX-80 Technical Manual: Volume II, Programming.
3.5.4.4 F3 - Receive
This function key is used to receive the database from the system. For details on using this function
key, refer to the DX-80 Technical Manual: Volume II, Programming.
3.5.4.5 F4 - Send
This function key is used to send the database to the system. For details on using this function key,
refer to the DX-80 Technical Manual: Volume II, Programming.
To Next Page
Loading...
