Comdial DX-80 - Sending a Voice Message

October, ‘03 Comdial 93
DX-80 Installation & Maintenance
3.6.4 SW/HW REVISION
You can use the SW/HW Revision to view the current version of software installed in the DX-80. The
Hardware Revision (HW Revision) is a label only field that allows the user of PC-DBA to record the
revision of hardware installed at the site. This information is stored in the Database Save operation of
PC-DBA.
Status can be:
• Idle = equipped and ready
• Fail =equipped, but errors
present. (no loop current.
Extension lost data
communications.
• Open = no hardware
recognized.
• Busy = in use