Modular Matrix Switcher
Comm-tec Srl 26 www.comm-tec.it
4I-UFS
● Supports seamless switching, it can be used in combination with other seamless output
signal card.
● Supports input resolution selection, and it is up to 1920x1080P@60Hz.
● Compatible with HDMI and DVI signal input.
● It is used with optical fiber transmitter to extend video signal, and the transmission
distance can up to 2 kilometers by single-mode optical fiber cable, or 300 meters by
multi-mode optical fiber cable.
● Supports image brightness, contrast, chrominance, sharpness, color temperature,
aspect ratio, and image mode setting.
● The input signal cannot be transmitted with HDCP.
● The input card does not support DDC channel.
1080P seamless OPTICAL output card with 4 OPTICAL ports.
4O-UFS
● Supports seamless switching, it can be used in combination with other seamless input
signal card.
● Supports output resolution selection, and it is up to 1920x1080P@60Hz.
● It is used with optical fiber receiver to extend video signal, and the transmission
distance can up to 2 kilometers by single-mode optical fiber cable, or 300 meters by
multi-mode optical fiber cable.
● The input signal cannot be transmitted with HDCP.
● The input card does not support DDC channel.
Note: Before using the 4I-UFS and 4O-UFS, the firmware program of matrix front-board
and back-board needs to be upgraded. Please seek technical assistance from our
technical support.
To Next Page
Loading...
