Comm-Tec MTX88M-N - IR Remote Control

Modular Matrix Switcher
Comm-tec Srl 29 www.comm-tec.it
5. IR Remote Control
With the IR remote, the matrix could be controlled remotely. As the function buttons on the
IR remote are the same with the ones on the front panel, the IR remote shares the same
operations and commands with the control panel.
Press the buttons under below format:
“Input Channel” + “Switch Mode” +“Output Channel”
Input channel buttons,
including 1~10+, only
1~8 are available
Menu buttons, including
switching buttons and
function buttons
Output channel buttons,
including 1~10+, only
1~8 are available