Modular Matrix Switcher
Comm-tec Srl 3 www.comm-tec.it
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
● Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
● Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to
persons.
● Do not dismantle the housing or modify the module. It may result in electrical shock or
burn.
● Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
● Refer all servicing to qualified service personnel.
● To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
● Do not put any heavy items on the extension cable in case of extrusion.
● Do not remove the housing of the device as opening or removing housing may expose
you to dangerous voltage or other hazards.
● Install the device in a place with fine ventilation to avoid damage caused by overheat.
● Keep the module away from liquids.
● Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on to the housing, unplug the module immediately.
● Do not twist or pull by force ends of the optical cable. It can cause malfunction.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
● Unplug the power cord when left unused for a long period of time.
● Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
To Next Page
Loading...
