write list can be any alpha numeric string or variable. This
command is useful for printing headings at the top of program
listings.
EXAMPLE:
OPEN 1,4 OPENS device #4, which is the printer.
CMD 1 All normal output now goes to the printer.
LIST The LISTing goes to the printer, not the screen—even the
word READY.
PRINT#1 Sends output back to the screen.
CLOSE 1 Closes the file.
COLLECT
Free inaccessible disk space
COLLECT [Ddrive number] [<ON | ,>Udevice]
Use this command to make available any disk space that has
been allocated to improperly closed (splat) files, and to delete
references to these files from the directory. Splat files are files
that appear on the directory with an asterisk next to them.
Defaults to device number 8.
EXAMPLE:
COLLECT DO
Free all available space which has been incorrectly allocated to
improperly closed files.
NOTE: It will also free space allocated for direct access. See
your disk drive manual for more information.
COLLISION
Define handling for sprite collision interrupt
COLLISION type [.statement]
type Type of interrupt as follows:
1 = Sprite-to-sprite collision
2 = Sprite-to-display data collision
3 = Light pen
17-14
To Next Page
Loading...
