Commodore Amiga A2000 - Figure 3-21 Display Window Horizontal Stopping Position

SELECTING THE STOPPING POSITION
The stopping position for the display window is the horizontal and vertical coordinates of
the lower right-hand corner of the display window. One register, DIWSTOP, contains both
coordinates, known as HSTOP and VSTOP.
See the notes in the "Forming a Basic Playfield" section for instructions on setting these
registers.
FULL SCREEN AREA
0 255 361
------------------------------------------------
| | |
| | HSTOP of DISPLAY |
| | WINDOW occurs in |
| | this region. |
| | |
------------------------------------------------
Figure 3-21: Display Window Horizontal Stopping Position
Select a value that represents the correct position in low-resolution, non-interlaced mode.
- Playfield Hardware 73 -