ComNav 1500 - Technical Specifications

ComNav 1500 / 1510 Autopilot
12. TECHNICAL SPECIFICATIONS
12.1 Autopilot Instrument
Dimensions: 113mm x 113mm x 23mm (4.3” x 4.3” x 0.9”)
Weight: 260g (9.17 oz)
Enclosure: Water proof
Instrument cable: 0.4 m (16”)
Power supply: 12 V DC (10-16 V). The instrument is polarity protected.
Power consumption: 0.08 W. At max lighting 0.8 W.
Current consumption: 7 mA (at 12V). At max lighting 70 mA (at 12V).
12.2 Distribution Unit A-1500
Dimensions: 220mm x 145mm x 55mm (8.7” x 5.7” x 2.2”)
Weight: 800g (28.2 oz)
Enclosure: Splash proof
Cable: 8m (26ft) NX2 cable
Power supply: 12 or 24 V DC (10-40 V)
Power consumption: 4 W, plus drive unit demand
Current consumption: 0.3A (at 12V)
Max. motor output drive: 25 Amps
Output: NMEA 0183 compass, RAI
12.3 Distribution Unit A-1510
Dimensions: 160mm x 110mm x 38mm (8.7” x 5.7” x 2.2”)
Weight: 420 g (14.8 oz)
Enclosure: Splash proof
Cable: 8m (26ft) NX2 cable
Power supply: 12 or 24 V DC (10-30 V)
Power consumption: 3 W, plus drive unit demand
Current consumption: 0.3A (at 12V)
Max. motor output drive: 15 Amps
Output: NMEA 0183 compass, RAI
12.4 Rudder Follower & Linkage
51mm x 96.5mm x 89mm (3.0” x 3.8” x 3.5”)
127mm (5”) long
2 arms, each 394-635mm (15.5”-25”) long
1.8 kg (4 lbs) (without cable and linkage arm)
Water proof
15m (50ft), 3-lead.
From Distribution Unit
2.5mW
0.5mA
± 55°
1k
ohms
Dimensions:
Transmitter arm:
Ball joint linkage arm:
Weight:
Enclosure:
Cable:
Power supply:
Power consumption:
Current consumption:
Rudder angle:
Resistance:
Life:
10 million cycles dither
- 56 -