SinoGNSS
○
R
T300 User Guide
8
2 Setting up the receiver
This chapter provides general information on environmental requirements, setup,
power supply and connection of the T300 receiver.
2.1 Environmental requirements
To keep the receiver with a reliable performance, it is better to use the receiver in
safe environmental conditions:
• Operating temperature: -40°C to +65°C
• Storage temperature: -45°C to +85°C
• Out of corrosive fluids and gases
• With a clear view of sky
2.2 Front panel
Receiver front panel contains five indicator light emitting diodes (LEDs), Power
button and record button. The indicator LEDs show the status of power, radio,
satellite tracking, Internal 3G and Raw Data Recording. For detailed information, see
chapter 3.2.
2.3 Lower housing
Receiver lower housing contains a serial port, UHF radio antenna connection, two
removable battery compartments (slots for SIM and memory card are located inside
of battery compartment A), and a threaded insert.
To Next Page
Loading...
