SinoGNSS
○
R
T300 User Guide
25
Tip: The external power supply is recommended when T300 set as a base station.
More: Aim improving the radius of survey work, we can change the base receiver’s Whip
Antenna to External Antenna. Any others don’t need to change.
5.4.1 Start Base Station by CGSurvey
Firstly, build Bluetooth connection between the T300 receiver and your
controller as showed in Chapter 5.3.
Secondly, modify parameters including correction format, antenna type and
communication protocols:
Parameter:
Select RTCM3(BDS) as correction
format, otherwise choose RTCM3
if you are not in the coverage
area of Beidou.
Select T300 as Antenna type.
Click Save Param
① T300 GNSS Receiver
② External Antenna
To Next Page
Loading...
