SinoGNSS
○
R
T300 User Guide
28
The following table shows the specification of T300 Internal Radio:
Transmit mode: Transparent/TT450S
Receiving mode: MAC (compatible with CHC protocol), TT450S,
Transparent EOT and south protocol.
0.5, 1, 2 Watt adjustable
1-5km, depends on power supply and environment condition
RTK:
To achieve a successful data link, set
the same protocol and frequency as
the base.
Click Set -> OK -> Start to complete
the configuration.
indicates that the Rover is set
up successfully.
Check the differential LED in the
front panel, flashing once per
second means that the rover station
is receiving correction data.
To Next Page
Loading...
