Compaq 1000 Series User Manual

8 Compaq 1000 Series UPS Operation and Reference Guide
T
technical support x
telephone numbers xi
TEST/ALARM RESET button
exiting Configure mode 4-7
initiating a self-test 3-11
initiating Configure mode 4-2,
4-6
testing new batteries 5-12
toggling a configuration
parameter 4-6
warning on testing new
batteries 5-12
testing
initiating a self-test 3-11
new batteries 5-12
text conventions vii
troubleshooting
after start 6-3
during start 6-2
U
Uninterruptible Power System 1000
Series
features 1-6
front panels 1-3
front panels, illustrated 1-3
items not supplied with the
UPS 2-2
items supplied with the
UPS 2-2
models 1-2
rear panels 1-4
rear panels, illustrated 1-4
updating the UPS
configuration 4-2, 4-6
UPS/computer interface cable
connecting from the UPS to the
host computer 2-5
utility voltage
configuring the UPS to
match 4-9
matching with UPS
configuration 4-7
monitored by qualified
electrician 4-9
utility voltage range See operating
range
V
VCCI Notice for Japan A-5
voltage level
configuring, nominal 4-4
voltage range
configuring to match the utility
voltage, illustrated 4-9
configuring, nominal 4-4
W
warning
battery handling ix
electrical shock ix
high earth conductor leakage
current ix
rack stability x
weight ix
warranties
$25,000 Computer Load
Protection Guarantee 1-11
applicability 1-11
limited warranty 1-11
pre-failure battery 1-11, 5-4
qualifying 1-11
three-year limited 1-11
Wiring Fault
audio alarm disabling 4-4
audio alarm enabling 4-4
www.compaq.com xi

Compaq 1000 Series Specifications

General

Brand	Compaq
Model	1000 Series
Category	UPS
Language	English