Compaq 1000 Series

6 Compaq 1000 Series UPS Operation and Reference Guide
Compaq Multi-Server UPS
Card
example of use 1-8
overview 1-8
Compaq Scalable UPS Card
example of use 1-9
overview 1-9
Compaq SNMP-EN Internal
Adapter
example of use 1-9
overview 1-9
overview 1-8
protecting multiple
servers 1-8
scaling up UPS
capabilities 1-9
output specifications C-4, C-5
overcurrent protection 3-8, C-6
overview
battery maintenance 5-1
communications port 1-7
Compaq Multi-Server UPS
Card 1-8
Compaq OnliNet Centro 1-7
Compaq Power Management
Software 1-7
Compaq Scalable UPS
Card 1-9
Compaq SNMP-EN Internal
Adapter 1-9
FailSafe III 1-7
installation 2-1
LanSafe III 1-7
Network Transient
Protector 1-10
operating the UPS 3-1
option card 1-8
Remote Emergency Power
Off 1-10
specifications C-1
troubleshooting 6-1
UPS 1-1
P
PBX, connecting to digital 1-10
physical specifications
T1000 and T1000h C-2
T1500, T1500j, and
T1500h C-2
power cord
cords shipped with the
UPS 2-3
requirement for additional
cord 2-3
solution for additional
cord 2-3
Power Management Software See
Compaq Power Management
Software
Power Products Documentation CD
viewing
Compaq 1000 Series UPS
Operation and Reference
Guide 2-2
Compaq Power Products
Software Reference
Guide 2-2
powering the UPS off See
STANDBY button
problems See troubleshooting
R
range See operating range
rear panels, illustrated 1-4
reference material
Compaq Power Management
Software Installation
Instructions 2-2
Compaq Power Products
Software Reference
Guide 2-2
Important Safety Information x,
2-2, 2-3
Remote Emergency Power Off
connecting 1-10, 2-7
connecting to the connector
block, illustrated 2-8
features 1-10
managing multiple UPSs 1-10