. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-2 Using the CD-ROM Drive
Writer: Project: Using the CD-ROM Drive Comments:
File Name: G-ch5.doc Last Saved On: 4/24/97 10:31 AM
Internal 8x CD-ROM continued
Ref Component Function
Headphone Jack Connects the headphone
Disk Tray Slides in and out of the Internal 8X CD-ROM drive
bay and holds the disk in place
Emergency Eject Hole Allows you to manually eject a CD if the eject button
is inoperable
Eject Button Opens and closes the disk tray
Opening the Tray Automatically
You can use the automatic eject button to open and close the CD-ROM tray.
Allow plenty of clearance for the tray to open and close, following the
instructions below:
1. With your server turned on, open the CD-ROM tray by pressing the
eject button on the front panel of the drive.
2. Place the CD-ROM disk in the tray, handling the disk from the edges.
Do not touch the flat surfaces of the disk.
To Next Page
Loading...
