. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-9
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Using Security Management Comments:
File Name: H-ch6.doc Last Saved On: 4/24/97 10:34 AM
Smart Cover Sensor
A feature of the Compaq ProLiant 800 Server, the Smart Cover Sensor is a
combination of hardware and software technology that alerts you when the
computer cover or side panel has been removed. There are three levels of
protection, as described in the following table:
Table 6-2
Smart Cover Sensor Protection Levels
Level Setting Description
Level 1 Disabled Smart Cover Sensor is disabled.
Level 2 Notify User When the computer is restarted, a message
indicates that the computer cover or side panel
has been removed.
Level 3 Setup Password When the computer is restarted, a message
indicates that the computer cover or side panel
has been removed. You must enter the Power-
On password to continue.
QuickLock
When QuickLock is enabled through the System Configuration Utility, you
can disable the keyboard and pointing device interface connected to the built-
in mouse connector while you are still within an application.
To activate QuickLock and disable the keyboard and pointing device
after you are in an application, press and hold the Ctrl and Alt keys
while pressing the value for n. The default value for n is “L.” For
example, entering the QuickLock hot key combination Ctrl+Alt+L
disables the keyboard and the pointing device interface.
The application cannot be accessed now, but remains in view on the
monitor screen. To reenable the input device interface and bring the
application to the screen, enter the Power-On Password that you
established in the System Configuration Utility.
To Next Page
Loading...
