. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-23
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM
5. Use your thumbs to press firmly down on the DIMM while pushing the
latches inward with your index fingers until the latches snap into place.
Figure 3-18. Installing a DIMM
6. Replace the expansion backplane brace.
DIMMs can be placed in any slot; the system ROM automatically recognizes
and configures memory changes.
Installing Mass Storage Devices
There are four drive bays for internal mass storage devices in the ProLiant 800
server. SCSI devices can be installed in either the removable media drive bays
0, 2, 3, or 4, or attached to the external Fast-Wide SCSI-2 port via an external
storage system.
To Next Page
Loading...
