. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-2 Installing the Server
Writer: Project: Installing the Server Comments:
File Name: O-appe.doc Last Saved On: 4/24/97 10:51 AM
Overview of Installing the Server
Follow this sequence when installing your Compaq ProLiant 800 server for
the first time. This sequence is the same as illustrated on the quick install
chart that came with your new server. Additional information on each step is
provided in the remainder of this manual.
1. Unpack the server, keyboard, mouse, and monitor (monitor not
supplied).
2. Install any ISA and/or PCI expansion boards.
3. Install other options such as additional memory, hard drives, and
external storage devices.
4. Connect peripheral devices such as keyboard, mouse, monitor, and
network cables.
5. Set the input voltage select switch to the appropriate input voltage.
6. Connect the power cord.
7. Turn on the monitor.
8. Turn on the server and place the SmartStart and Support Software CD
in the CD-ROM drive to boot and configure the server.
To Next Page
Loading...
