EasyManua.ls Logo

Compaq ProLiant 800 - Page 137

Compaq ProLiant 800
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-7
Compaq ProLiant 800 Server Reference Guide
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
POST Error Messages continued
Error Code Audible
Beeps
L=Long
S=Short
Probable Source of
Problem
Action
501-Display Adapter
Failure
1L,2S Video display controller Replace the video
board.
601-Diskette
Controller Error
None Diskette controller
circuitry failure
1. Make sure the
diskette drive
cables are
attached.
2. Replace the
diskette drive
and/or cable.
3. Replace the system
board.
605-Diskette Drive
Type Error
2S Mismatch in drive type Run the System
Configuration Utility to
set diskette type
correctly.
702-A coprocessor
has been detected
that was not reported
by CMOS.
None Installed coprocessor not
configured.
Run the System
Configuration Utility
and correct.
703-CMOS reports a
coprocessor that has
not been detected
2S Coprocessor or
configuration error.
1. Run the System
Configuration
Utility and correct.
2. Replace the
coprocessor.
continued

Table of Contents

Related product manuals