. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-34 Diagnostics Tools
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
Running Inspect
To run Inspect, complete the following steps:
1. Press the Ctrl+Alt+Delete keys to reboot the server.
2. Press F10 when the following prompt appears at the top of the screen
during POST.
Press "F10" key for System Partition Utilities
IMPORTANT: The text appears for only two seconds. If you do not press F10
during this time, you must reboot the server.
3. Select the Diagnostics and Utilities option.
4. Select Inspect the Computer. Operating environment information
displays.
5. Review, print, file, or discuss this information with your Authorized
Compaq Reseller or Service Provider.
To Next Page
Loading...
