Compumatic MINIDART v3 - Time Limit; Acceptor Type; Credit in 1

-17-
and return to root menu (see page 15).
3.3- TIME LIMIT
Press
1
and display will show
When we see the submenu name, we have to
press the button
TEAM
to enter into this submenu, where we are able to
change and fix the maximum time that the player
has for throwing each dart to the target.
With
1
2
we change the time limit
between
NO TIME LIMIT
and
60 SECONDS
in 10 seconds increments. The time is shown
in the temp score displays, if we choose '0',
then the player has unlimited time for all
darts.
Once we are finished with the time limit
adjustment, to confirm and store the
values we have to press the button
TEAM
3.4- ACCEPTOR TYPE
Press
1
and display will show
When we see the submenu name, we have to
press the button
TEAM
to enter into this submenu, where we are
able to change and fix the type of acceptor
used. With
1
2
we change the acceptor type between
and
Serial means that there is an electronic
acceptor mounted with a serial output
connected to this pin. Only one coin
input can be set to serial.
The pin number (0,7,8,9,10,3,4) is also
shown in the temp score displays, '0'
means Parallel acceptor.
Once we are finished with the adjust-
ment, to confirm and store the values
we have to press the button
TEAM
3.5- CREDIT IN 1
Press
1
and display will show
This input refers to pin 7 of connector
CN13, and also to the 2 pin connector CN6
(used in this machine), when you plug the acceptor
to this connector. When we see the submenu name,
we have to press the button
TEAM
PARALLEL
SERIAL PIN 7
SERIAL PIN 8
SERIAL PIN 9
SERIAL PIN 10
SERIAL PIN 3
SERIAL PIN 4
PROGRAMMING
3.3- TIME LIMIT
3.5- CREDIT IN 1