Compumatic MINIDART v3 - Blink Player; Average

-31-
When we see the submenu name, we have to
press the button
TEAM
to enter into this submenu, where we are able
to activate or cancel the blinking (ON and
OFF) of the current player's points during the
'throw darts' time.
If the option is activated, the current
player's points blink during the 'throw
darts' time. If the option is cancelled,
only the player number led blinks.
With
1
2
we choose between
to cancel the blink player option, or
to activate the blink player option.
The equivalent 0 or 1 is shown in the temp
score displays.
Once we are finished with the blink
player setting, to confirm and store the
values we have to press the button
TEAM
3.47- AVERAGE
Press
1
and display will show
When we see the submenu name, we have to
press the button
TEAM
to enter into this submenu, where we are able
to show the average points of the three
darts of the player at the end of every turn.
If the option is activated, the average is
shown in the temporary score displays
preceded by a letter 'A'. For example,
if the result of the first dart is 5 points,
the second 11 points, and the third 14 points,
the temporary score is 30 points, and the
average is 10 points, which are shown
like
With
1
2
we choose between
to cancel the average option, or
to activate the average option.
The correspondent 0 or 1 is shown in the temp
score displays.
Once we are finished with the average
setting, to confirm and store the values
we have to press the button
TEAM
3.48- ROUND WINNER
Press
1
and display will show
When we see the submenu name, we have to
press the button
TEAM
NO
YES
NO
YES
PROGRAMMING
3.46- BLINK PLAYER
3.47- AVERAGE