Compumatic MINIDART v3 - Change Target Type; Removing the Target

-7-
2.2- C HANGE TARGET TYPE
Minidart machine has two types of target:
-The small target, also known as "European".
-The big target, also known as "American"
Please follow enclosed instructions step by step how to change the target:
2.2.1- R EMOVING THE TARGET .
1- Take out 4 wing nuts which are marked with letter B.
2- Disconnect the flat cable A from the Target.
3- Take out the set from the door.
INTRODUCTION AND
OBSERVATIONS
2.2- CHANGE TYPE OF TARGET
2.2.1- REMOVING THE TARGET
FIGURE 1
(Inside machine)
Rear view