EasyManua.ls Logo

Compumatic MINIDART v3 - How to Abort the Game; How to Cancel the Credits; How to Switch the LED Ring On;Off; How to Mute the Machine Sound

Default Icon
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-47-
shortly at any time of the play except for
three seconds after the throw dart indica-
tion appears.
7- H
OW
TO
ABORT
THE
GAME
To abort the current game turn on and off the test
switch while keeping the button
OUT CHANCE
pressed.
8- H
OW
TO
CANCEL
THE
CREDITS
To cancel all the credits turn on and off the
test switch while keeping the button
IN PICKIT
pressed.
9- H
OW
TO
SWITCH
THE
L
ED
R
ING
ON
/
OFF
(
ONLY
EUROPEAN
AND
AMERICAN
TARGETS
)
The player can switch the Led Ring off
or on, at any moment by keeping the
button
OUT
pressed 6 seconds.
10- H
OW
TO
MUTE
THE
MACHINE
SOUND
The player can mute the machine sounds
at any moment by pressing 6 seconds the
button
EQUAL
11- H
OW
TO
ADJUST
THE
DATE
AND
THE
HOUR
WITHOUT
OPENING
THE
MACHINE
You can change the date and the hour without
entering in test.This is the procedure:
1.- You have to keep the button
1
pressed 10 seconds of the numeric
keyboard. After this time, the button
PLAYERS
will blink quickly.
2.- Keeping the button pressed, you have to
introduce the next code:
Triple 20 - Triple 5 - Triple 12 pressing
the target. Release the key pressed.
3.- In the cricket leds, you will see the
hour. You have to introduce four numbers, to
correct the hour. For example, to introduce 9:04,
you have to push the numbers '0','9','0' and
'4'. The changes will be reflected in the
cricket leds, simultaneously.
4.- To change from hour to date, you have
to push the button
PLAYERS
To adjust the date, you have to proceed
by the same way, but you have to intro-
duce 6 numbers, which it will indicate
the day, month and year.
5.- You can exit not pressing anything
during 5 seconds.
NOTE: This system will only be active,
if the 'RESET BAR' setting is adjusted
to 'Yes' or '1'.
You can't accede if the machine is not
in show (with or without credits).
DART ADVANCE
HOW TO ADJUST THE DATE AND THE HOUR

Table of Contents