5-2 l Mainte nance
5. Installation
Read through the whole section 5 before installing the machine.
All instructions must be followed in the order shown to avoid damage.
Lift and transport
Read and follow the
instructions in
section 12 for lifting
and transportation of
the granulator.
Depending on the mode of
transport and delivery the
granulator can be delivered
with the hopper or hopper
inlet part unmounted.
5.1 Place of use
A free space is needed around the granulator to facilitate cleaning,
service and maintenance.
Floor, foundation, place of use
Check and make sure that the floor
on the place of use is horizontally
and is sufficiently strong for the
granulator in operation.
If the floor is uneven it should
be levelled before installation.
Safety distance when opening
the hopper
Inlet Part
Hopper
NOTE: When opening the
granulator hopper a safety
zone of at least 600 mm
must be kept clear behind
the granulator hopper, when
the hopper is opened. Check
the layout of the granulator
in section 10 to see how
much space your granulator
requires.
Min.
600mm
To Next Page
Loading...