Conair 1836 - Page 4

– Parts of the safety system . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
– Important parts belonging to the safety system
of the granulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
4.2 Functional description of parts of the safety system . . . . . . . . . . . 4-4
– Emergency stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
– Cutter lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
– Safety switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
– Standstill monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
4.3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
– Safety instructions and safety measures during operation . 4-6
– Safety instructions and safety measures concerning
the electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
– Safety instructions and safety measures with regard to
cleaning, maintenance and service . . . . . . . . . . . . . . . . . . . 4-7
4.4 Personal safety equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
– Ear protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
– Protective gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
– Protective goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
4.5 Safety instructions and caution when changing knives . . . . . . . . 4-11
– Length, dimensions and strength class on screws . . . . . . 4-12
– Tightening torque and torque wrench . . . . . . . . . . . . . . . . 4-12
– Tips for installation of knives . . . . . . . . . . . . . . . . . . . . . . 4-12
5. Installation
5.1 Place of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
– Floor, foundation, place of use . . . . . . . . . . . . . . . . . . . . . . 5-2
– Safety distance when opening the hopper . . . . . . . . . . . . . . 5-2
5.2 Install the hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
5.3 Install the front inlet part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
5.4 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
– Location of the electrical cabinet . . . . . . . . . . . . . . . . . . . . 5-6
– Check the direction of rotation of the granulator motor . . . . 5-6
– Check the direction of rotation of the blower motor . . . . . . 5-7
– Check the direction of rotation of the
optional equipments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
– If any direction of rotation is wrong . . . . . . . . . . . . . . . . . . . 5-7
ii l Table of Content s