Consilium CM2.2 - Remove All Disablements; Service Menu; About the Service Menu; Save the System Log to a USB Memory Stick

5User Instructions for Control Panel M 2.2 User Manual
28
5100606_CFD5000 T - CM2.2_User Manual_T_EN_2023_E
1 Select Menu » 3 Disablements » 2 Disable. list
2 Choose the disablement you want to cancel.
3 Press the button
5.7.2 Remove All Disablements
This menu removes all active disablements presented in the Disablement list.
1 Select Menu » 3 Disablements » 3 Remove all
2 Confirm to cancel all active disablements in the system.
5.8 Service Menu
5.8.1 About the Service Menu
(Access level 4)
The Service menu is used for configuring the system in the commissioning phase,
as well as for troubleshooting and making updates when the system is in operation.
The menu has functions for loading and saving information from/to an approved
USB memory stick (available from an authorised dealer).
The Service menu displays a list of 7 service menu alternatives:
1 System Details
2 Zones
3 Loops
4 Configuration
5 Save System Log
6 Firmware
7 Set System Name
Hint!
Please refer to the Service and Maintenance manual for detailed information about
the Service menu.
5.8.2 Save the System Log to a USB Memory Stick
If you want to check the information saved in the system log you can download it
from the central unit. The system log files contain information generated for
evaluating the system, such as lists of system components, system software and key
events.
Table 11. The following lists are included in the log
Centrals list Key events
Disablement list Modules list
Fault list Periodic disablement list
Fire alarm list Pre alarm list
History list Warning list