2. Basic operation
Software Manual
5
Run a program (Using SHELL)
To execute an application with SHELL up and running, select the “Run” command from the Start menu
and specify the application.
1. Press “Ctrl+Esc” hot key or “Start” button to pop up the start menu. Select the “Run…” menu; the
“Run” dialog box pops up.
2. Input the program’s name directly in the “Open” combo box, or press the “Browse…” button to
select the program.
When the “Browse…” button is pressed, the “Run” browse dialog box pops up, select a program in
this dialog box
3. After you select a program, press the OK button. The selected program’s name is added to the
“Run” dialog box’s open combo box.
To Next Page
Loading...
Need help?
General
