7. CONTEC Manager
Software Manual
21
“Add Schedule” and “Set Schedule” dialog box
Set Program and its argument
Press “Browse” button to browse a program, the program name will be set to the “Program and
Argument:” edit box. If the program needs arguments, input the arguments directly behind the program
name.
Run Timing Modes
There are six timing modes, “Designated”, “System Start”, “Every Hour”, “WeekDay” “Every Week”,
“Every Month”. The meanings of the modes are following.
“Designated” : The program is run only once at designated date and time.
“System Start” : The program is run every time the CONTEC manager is started. For the
CONTEC Manager is normally auto-launched at system start, so the setting
program is run every time the system starts. If the program’s run timing is set
as “System start”, it can be selected to run depend on other programs. When
all the dependent programs are started and ended, the program is begun to
start.
“Every Hour” : The program is run at the designated minute every designated hours. For
example, run at every 8:30, 16:30 and 0:30 every day.
“WeekDay” : The program is run at every designated week day. For example, run at 8:30
every Monday, Wednesday and Friday.
“Every Week” : The program is run at designated weekday every week. For example, run at
8:30 every Monday.
“Every Month” : The program is run at designated day and time every month. For example, run
at 8:30 o’clock, 15th every month.
To Next Page
Loading...
Need help?
General
