Contec IPC-PT/MV10 Series - 6 System Setting

6. System Setting
Software Manual
13
6. System Setting
Windows CE installed on the SH4 CPU & .NET installed IPC series has the “System Setting” icon in the
Control Panel as the assorted setting tool to flexibly meet the user’s needs.
CAUTION
- When you have made changes to system settings, you have to back up the registry to save the new
settings to the system.
The changes you made to most of the system settings take effect the next time you start (restart) the
system.
- If you save the registry after selecting SVGA while your system supports only VGA, for example,
the system may fail to get started normally.
In such cases, execute a forced reset to start the system restored with the factory settings.