7. CONTEC Manager
Software Manual
19
7.
CONTEC Manager
CONTEC Manager is a program that provides management functions, such as scheduling program
execution, loading services, managing user information, managing boot action and displaying system
information.
Run/Show/Close/Destroy CONTEC Manager
Run CONTEC Manager
CONTEC Manager program is auto-launched at boot time. If it is not auto-launched at boot time, run
“wcemngr.exe” to start CONTEC Manager.
Show CONTEC Manager
Normally CONTEC Manager is not shown, it can be brought to foreground by pressing hot key combine
“ALT+ESC” or “CTRL+ALT+DEL”, or by running its executive “wcemngr.exe” again.
Close CONTEC Manager
Press “ESC” key or “Enter” key to close the CONTEC Manager.
Destroy CONTEC Manager
CONTEC Manager can be destroyed by running its executive “wcemngr.exe” again with a command
line argument “CONTEC”, that is “wcemngr CONTEC”.
If you press “ESC” key or “ENTER” key to close the CONTEC Manager, it is really not destroyed, only
hidden.
Note!
If you destroyed the CONTEC Manager, the scheduling function and the loaded services will no
longer functioning. Normally please don’t destroy it.
To Next Page
Loading...
Need help?
General
