13. Appendix
Software Manual
61
Using Remote Tools
Microsoft development environments such as eVC++4.0, provide convenient tools such as the “Remote
Registry Editor”. This allows the user to manipulate the registry of Windows CE when a Windows CE
machine is connected to a development machine. This series also supplies these tools.
Connecting the Development and Target Machines
To use remote tools it is necessary to connect the development machine to the target machine, as in
debugging.
This process uses the same procedure described in Chapter 13 of this manual “Appendix: Application
Development Procedures,” with the “Windows CE Platform Manager Configuration” selected for each
tool from the remote side.
Normally the “Windows CE Platform Manager Configuration” for each remote tool is shown on the
Connection menu.
After the development machine and target machine have been connected, each of the tools is ready to
use.
For information on the use of tools, refer to the Help menu.
To Next Page
Loading...
Need help?
General
