Contec IPC-PT/MV10 Series - 3 Standard Drivers

3. Standard Drivers
Software Manual
7
3. Standard Drivers
Windows CE .NET 4.2 on the SH4 CPU & .NET installed IPC series provides the drivers listed below.
This chapter describes each of the standard drivers listed.
Table 3.1. Driver List < 1 / 2 >
Driver Description
Graphic
- Compatible with hardware cursor
- LCD output ( TFT, VGA/SVGA )
Serial
- Compatible with on-board serial 2-port (RS-232C)
(On the IPC-PT/LS10 series, IPC-PT/LS11 series, IPC-PT/LS15 series,
IPC-PT/LS16 series, IPC-PT/MV10 series, IPC-PT/MV11 series, IPC-PT/MV15 series,
IPC-PT/MV16 series, COM2 can be switched
between RS-422
and RS-485 by a jumper on the main unit. See the hardware manual for details.)
- Debug port feature supported
(COM1 or COM2 can be assigned as a debug port by the DIP switch :
For setting DIP switches, refer to the hardware manual.
To switch between COM1 and COM2, see Chapter 6 “System Setting”.)
- PCI serial board *1
By installing an additional CONTEC PCI serial board, you can use up to 10 ports
including the serial ports in the main unit. (On the IPC-PT/LS10 series,
IPC-PT/LS11 series, IPC-PT/LS15 series, IPC-PT/LS16 series, IPC-PT/MV10 series,
IPC-PT/MV11 series, IPC-PT/MV15 series, IPC-PT/MV16 series :
Installing the additional PCI serial board requires the optional
single-slot expansion unit for PCI half size (IPC-PAC(PCI)-C1))
Touch panel - CONTEC touch panel controller LCD driver
USB
- Host driver for USB 1.1
- HID driver (supporting the mouse and keyboard)
PS/2 mouse
- PS/2 mouse driver
(On the IPC-PT/LS10 series, IPC-PT/LS15 series, IPC-PT/MV10 series and
IPC-PT/MV15 series)
PS/2 keyboard
- Driver for PS/2 101 / 106 keyboard
(On the IPC-PT/LS10 series, IPC-PT/LS15 series, IPC-PT/MV10 series and
IPC-PT/MV15 series)
PCMCIA - Driver for PCMCIA 2 slot
ATA flash card - Driver for PCMCIA , CF
LAN - On board 100/10base LAN driver
Isolated I/O - DIO port access via DLL
Sound - Sound source stereo output driver
Function
switch
- Driver for the function switches below the front panel of the panel computer
(IPC-BX/M10DC5 is not supported.)
Wireless LAN - Driver for CONTEC wireless LAN card (FX-DS110-PCC or FX-DS110-PCC2)
PC/104 general
purpose I/O
- Access DLL for the I/F board connected to the PC/104
- Supports memory, IO, and interrupts
(On the IPC-BX/M10DC5)
Internal PIO port
- Access DLL for Internal PIO port. Can be switched between 8 IN + 8 OUT or 16 OUT.
(On the IPC-BX/M10DC5)