Contec IPC-PT/MV10 Series - Page 15

3. Standard Drivers
8
Software Manual
Table 3.1. Driver List < 2 / 2 >
Driver Description
PCI bus
general-purpose I/O
- Access DLL for the I/F board connected to the PCI bus
- Supports memory, IO, and interrupts
(On the IPC-PT/LS10 series, IPC-PT/LS11 series, IPC-PT/LS15 series,
IPC-PT/LS16 series, IPC-PT/MV10 series, IPC-PT/MV11 series, IPC-PT/MV15 series,
IPC-PT/MV16 series)
*1: The supporting CONTEC serial boards are the COM-1(LPCI)H, COM-2(LPCI)H, COM-4(LPCI)H,
COM-2(PCI)H, COM-4(PCI)H, COM-8(PCI)H, COM-2P(PCI)H, COM-2PD(PCI)H.
Follow the following operating conditions only when the COM-8(PCI)H is used :
- The COM number of the 10th port (CH8 on the COM-8(PCI)H) is not COM10 but COM0.
Note that the port must be opened as COM0, for example, when used by a program.