7. CONTEC Manager
22
Software Manual
Setting “Designated” Mode
Select “Designated” radio button in “Run Timing” group box.
The current date time is displayed in the “Date and Time” edit boxes and combo boxes in the “Start
Time” group box.
Checking the “Random Start from xx:xx to yy:yy” option executes the program at a random time
between xx:xx and yy:yy.
Even when two or more units in the SH4 CPU & .NET installed IPC series exist with the same settings,
this allows the program to start running at different times.
To Next Page
Loading...
