Control Concepts FUSION Series - AUX I;O Card (Optional); P3 - 10 Pin aux I;O Connector

25
© Control Concepts Inc., 2013
www.ccipower.com 1-800-765-2799 Compact FUSION Installation Manual Revision 3.50.2
4. AUX I/O Card (Optional)
The auxiliary I/O expansion card is an optional card that allows the controller to have added features.
The standard I/O card comes with (2) digital inputs, (2) digital outputs and (2) analog outputs
(retransmits).
The retransmits and digital inputs/outputs are isolated from processor, but not each other.
Analog Retransmit Specications:
Voltage output: 0-10 Vdc, 20 mA max
Current output: 0-20 mA, 15 Vdc compliance
For selecting voltage or current mode for the retransmits, connecting to the Fusion Control Panel
Software is required. See the Fusion Control Panel Software manual for details.
The default settings for both retransmits are 0 - 5 Vdc output.
Digital Inputs (x2):
Dry contact 0.4 mA to circuit common
Open collector TTL to circuit common, pull up to 5 Vdc through a 10KΩ resistor
Digital Outputs (x2):
Relay Driver (transistor based)
Open collector (transistor based) 150 mA at up to 48 Vdc (power supplied by customer)
May be powered by unregulated 4 Vdc, 100 mA onboard power supply.
Custom option cards available, please contact factory for custom applications.
4.1 P3 - 10 Pin Aux I/O Connector
Example of possible connections:
10 METER COM
9 METER 2
8 METER COM
7 METER 1
6 DIGITAL OUT 2
5 DIGITAL OUT 1
4 DIGITAL COM
3 DIGITAL IN 2
2 DIGITAL IN 1
1 +4Vdc DIGITAL
RETRANSMIT
+
-
This shows momentary switches for digital inputs 1 & 2. The digital output 1 is driven by the onboard
4 Vdc power supply. The digital output 2 is driven by the customers own supply.