Control Techniques Digitax ST - Page 189

Parameter
structure
Keypad and
display
Parameter x.00
Parameter
description format
Advanced parameter
descriptions
Serial comms
protocol
Electronic
nameplate
Performance
Menu 17
Digitax ST Advanced User Guide 189
Issue Number: 1 www.controltechniques.com
17.26 CTNet easy mode - first cyclic parameter destination node
Digitax ST Variant Plus
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0 to 25,503
Default 0
Update rate 4ms write
17.27 CTNet easy mode - first cyclic source parameter
Digitax ST Variant Plus
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0,000 to 9,999
Default 0
Update rate 4ms write
17.28 CTNet easy mode - second cyclic parameter destination node
Digitax ST Variant Plus
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0 to 25,503
Default 0
Update rate 4ms write
17.29 CTNet easy mode - second cyclic source parameter
Digitax ST Variant Plus
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0 to 9,999
Default 0
Update rate 4ms write
17.30 CTNet easy mode - third cyclic parameter destination node
Digitax ST Variant Plus
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0 to 25,503
Default 0
Update rate 4ms write
17.31 CTNet easy mode - third cyclic source parameter
Digitax ST Variant Plus
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0 to 9,999
Default 0
Update rate 4ms write