QUICK‐FITGSM
INSTALLATIONMANUAL
Page10
6 CLEAR ALL PROGRAMMED DATA FROM SIM
This is highly recommended when a SIM card you are going to use for the QUICK-FIT GSM
is not new and it already has some data stored in the phone book memory.
By sending this SMS to QUICK-FIT GSM all programmed parameters and numbers are
cleared:
;SDCLR;
After sending SMS you should wait at least 30 seconds for the command to be executed!
NOTE
By sending this command to the QUICK-FIT GSM all programmed data are
erased from the SIM card!
After the unit boots up again (3 quick beeps), send ;SSRES; which resets it and clears
any old data from the memory.
To Next Page
Loading...