ControlFreq QUICK-FIT - 9.8 EVENT LOGGING

QUICK‐FITGSM
INSTALLATIONMANUAL

Page30
9.8 EVENT LOGGING
QUICK-FIT GSM device support loging of specific events. QUICK-FIT GSM logs CLIP event
and alarm input events.
Log event consist of event type, time and telephone number or input number.
9.8.1 LOGN parameter
Parameter is used for defining the number of events printed out on PLOG request.
9.8.2 LOGI parameter
Parameter is used to define the media used for loging of events on QUICK-FIT GSM. User
can select between nonvolatile memory on QUICK-FIT GSM or select USB to transfer
events directly via USB to PC.
9.8.3 ALC parameter
Parameter is used to control behavior when log on QUICK-FIT GSM is full. User can select
between auto log clear or manual clear of log.
9.8.4 Table of parameters
Name Comment
LOGN Number of log events for printing out
LOGI Log interface
ALC Automatic log clear
Table 20: LOG parameters.
Example:
♦ Direct programming on the SIM card
QUICK-FIT GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name Number Description
LOGN 5 5 log events will be printed out on PLOG command
LOGI 0 Nonvolatile memory on QUICK-FIT GSM
ALC 1 Log is auto cleared when full
Table 21: LOG parameters example.