QUICK‐FITGSM
INSTALLATIONMANUAL
Page24
9.5 SMS MESSAGES EDITOR
You can write and send a short SMS message for each alarm input. The default message
is English, but it is possible to change language with LNG parameter. Each message is
built from 3 parts and user can write the first (User Location) and the second (alarm
event) part of the message. Unit adds the third part (alarm event description)
automatically. Language of the 3rd part may be changed by LNG parameter. The
message is stored in the SIM phone book so you should add any number for correct
operation.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
# 0 U S E R L O C A T I O N
# 1 I N P U T 1
# 2 I N P U T 2
# 3 I N P U T 3
# 4 I N P U T 4
NOTE
Message should not be longer than 14 characters! Space is also counted as
one character!
9.5.1 Table of parameters
Name Comment
#0 User location, same for all alarm messages
#1 Input 1, second part of message
#2 Input 2, second part of message
#3 Input 3, second part of message
#4 Input 4, second part of message
Table 14: Message parameters.
Example:
♦ Direct programming on the SIM card
QUICK-FIT GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name Number Description
#0House 1 Location definition
#1Kitchen 1 Alarm input is from the kitchen
Table 15: Message parameters example.
To Next Page
Loading...