ControlFreq QUICK-FIT - Table 12: Set-Up Parameters

QUICK‐FITGSM
INSTALLATIONMANUAL

Page22
9.4.7 SPK parameter
SPK parameter enables you to change the incoming sound level.
9.4.8 ARST parameter
ARST parameter defines periodic of auto restart time (in hours) of the QUICK-FIT GSM
device.
9.4.9 ADF parameter
Parameter is used to define voice refresh function, to prevent blocking of SIM in some
networks.
9.4.10 BUZ parameter
Parameter is used to control buzzer functionality on QUICK-FIT GSM. Buzzer is used to
audio support some events on QUICK-FIT GSM device
9.4.11 Table of parameters
Name Comment
UDC Tel. number of QUICK-FIT GSM device
ESC Input used as cancle button
RAN Auto answer ring number
HTN Hidden telephone number
TST SMS test time out
MNF Manual GSM provider selection
MIC Microphone volume control
SPK Speaker volume control
ARST Time out control for automatic system restart
ADF Auto dial functionality ( Call TN1 )
LNG Language selection
BUZ Buzzer control
Table 12: Set-up parameters.
Example:
♦ Direct programming on the SIM card
QUICK-FIT GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK