ControlFreq QUICK-FIT - 9.4 SET-UP PARAMETERS

QUICK‐FITGSM
INSTALLATIONMANUAL

Page21
9.4 SET-UP PARAMETERS
Different parameters are used to support versatile functionality of QUICK-FIT GSM.
9.4.1 HTN parameter
Hidden telephone number is a parameter used in order to conceal the telephone number
of the QUICK-FIT GSM device. The default value is set to “1” which means that the
number is displayed.
9.4.2 ESC parameter
Parameter is used to define the input used to cancle the outgoing call from the QUICK-
FIT GSM device.
9.4.3 UDC parameter
Parameter is used to synchronise QUICK-FIT GSM clock to GSM network clock. User must
enter here the number of the QUICK-FIT GSM SIM card ( Telephone number of QUICK-FIT
GSM device ).
9.4.4 RAN parameter
Parameter is used to provide support for auto-answer options for QUICK-FIT GSM device.
The number defines the numbers of rings needed for QUICK-FIT GSM device to answer
the incoming call. The incoming number must be on the TN list for QUICK-FIT GSM
device to answer.
9.4.5 TST parameter
A test SMS is sent periodically. QUICK-FIT GSM can send the test message in the interval
ranging from 1 hour to 240 hours.
Example:
To send test SMS TST value is set to 12, the numbers linked to “LN5” receive a
test message every 12 hours.
9.4.6 MIC parameter
MIC parameter enables you to change the outgoing sound level on primary microphone
input.