ControlFreq QUICK-FIT - Receive Credit Pars Parameters (Pcref); Receive All Clip Parameters (Pclp); Receive Intercom Button 1 Paramaters (Pdea); Receive Intercom Button 2 Paramaters (Pdeb)

QUICK‐FITGSM
INSTALLATIONMANUAL

Page35
10.7 RECEIVE CREDIT PARS PARAMETERS (PCREF)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed credit parse parameters (CREF, CVODA…):
;PCREF;
10.8 RECEIVE ALL CLIP PARAMETERS (PCLP)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed CLIP functionality related parameters (CLPEN, CLPOU, CLPI, CLPx):
;PCLP;
NOTE
User can use ;PCLP=x,y; to limit the number of CLIP numbers to be printed.
x = start number
y = end number
Example
;PCLP=1, 30; Prints first 30 CLIP numbers
10.9 RECEIVE INTERCOM BUTTON 1 PARAMATERS (PDEA)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 1 group parameters ( ATN1, ATN2, ATN3, ATN4, ATN5, RTNA, SDNA,
SDDA, TZSA, TZEA ):
;PDEA;
10.10 RECEIVE INTERCOM BUTTON 2 PARAMATERS (PDEB)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 2 group parameters ( BTN1, BTN2, BTN3, BTN4, BTN5, RTNB, SDNB,
SDDB, TZSB, TZEB ):
;PDEB;
10.11 RECEIVE INTERCOM BUTTON 3 PARAMATERS (PDEC)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 3 group parameters ( CTN1, CTN2, CTN3, CTN4, CTN5, RTNC, SDNC,
SDDC, TZSC, TZEC ):
;PDEC;