ControlFreq QUICK-FIT - 10.17 STATE OF THE CREDIT FOR THE PREPAID CARD

QUICK‐FITGSM
INSTALLATIONMANUAL

Page36
10.12 RECEIVE INTERCOM BUTTON 4 PARAMATERS (PDED)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 4 group parameters ( DTN1, DTN2, DTN3, DTN4, DTN5, RTND, SDND,
SDDD, TZSD, TZED ):
;PDED;
10.13 RECEIVE INTERCOM BUTTON 5 PARAMATERS (PDEE)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 5 group parameters ( ETN1, ETN2, ETN3, ETN4, ETN5, RTNE, SDNE,
SDDE, TZSE, TZEE ):
;PDEE;
10.14 RECEIVE INTERCOM BUTTON 6 PARAMATERS (PDEF)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 6 group parameters ( FTN1, FTN2, FTN3, FTN4, FTN5, RTNF, SDNF,
SDDF, TZSF, TZEF ):
;PDEF;
10.15 RECEIVE INTERCOM BUTTON 7 PARAMATERS (PDEG)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 7 group parameters ( GTN1, GTN2, GTN3, GTN4, GTN5, RTNG,
SDNG, SDDG, TZSG, TZEG ):
;PDEG;
10.16 RECEIVE INTERCOM BUTTON 8 PARAMATERS (PDEH)
By sending this command to QUICK-FIT GSM you receive SMS message with all currently
programmed button 8 group parameters ( HTN1, HTN2, HTN3, HTN4, HTN5, RTNH,
SDNH, SDDH, TZSH, TZEH ):
;PDEH;
10.17 STATE OF THE CREDIT FOR THE PREPAID CARD
By sending this command to QUICK-FIT GSM you receive SMS message with Credit amount
on your prepaid SIM card:
;PCCX;
Where X is the number of programmed prepaid card provider.