ControlFreq QUICK-FIT - Table 8: SL Parameter; Table 9: SL Example

QUICK‐FITGSM
INSTALLATIONMANUAL

Page19
ALL CALLS. Remote SMS programming and remote controlling is
possible from any phone!
Name / value Comment
SL = 0 All calls and SMS are accepted
SL = 1 Only number stored under parameter TN1 has access to
unit
SL = 2 Numbers stored under parameters TN1 to TN2 have access
to unit
SL = 3 Numbers stored under parameters TN1 to TN3 have access
to unit
SL = 4 Numbers stored under parameters TN1 to TN4 have access
to unit
SL = 5 Numbers stored under parameters TN1 to TN5 have access
to unit
Table 8: SL parameter
Example:
♦ Direct programming on the SIM card
QUICK-FIT GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name Number Description
SL 3
Numbers stored under parameters TN1 to TN3 have
access to unit
Table 9: SL example
♦ Remote programming by SMS
;SL=3;
9.3.1.1 LCV parameter
LCV is used to set the limit for low credit event. If the credit on prepaid SIM cards falls
below this limit SMS is sent.
9.3.1.2 CC1, parameters
Number used to check low credit value. They are provided from the GSM providers.
⇒ CC1 - This method can be used by any GSM provider that supports