ControlFreq QUICK-FIT - Page 26

QUICK‐FITGSM
INSTALLATIONMANUAL

Page26
9.6.4.2 TZEx parameter
Parameter is used to configure the end time for the time zone functionality - 24h time
format.
9.6.5 Table of parameters
Name Comment
ATN1 Button 1, Telephone number 1.
ATN2 Button 1, Telephone number 2.
ATN3 Button 1, Telephone number 3.
ATN4 Button 1, Telephone number 4.
ATN5 Button 1, Telephone number 5.
RTNA Button 1, time out control for voice connection.
SDNA Button 1, DTMF number to send.
SDDA Button 1, delay for DTMF number to send.
TZSA Button 1, time zone start period.
TZEA Button 1, time zone end period.
BTN1 Button 2, Telephone number 1.
BTN2 Button 2, Telephone number 2.
BTN3 Button 2, Telephone number 3.
BTN4 Button 2, Telephone number 4.
BTN5 Button 2, Telephone number 5.
RTNB Button 2, time out control for voice connection.
SDNB Button 2, DTMF number to send.
SDDB Button 2, delay for DTMF number to send.
TZSB Button 2, time zone start period.
TZEB Button 2, time zone end period.
CTN1 Button 3, Telephone number 1.
CTN2 Button 3, Telephone number 2.
CTN3 Button 3, Telephone number 3.
CTN4 Button 3, Telephone number 4.
CTN5 Button 3, Telephone number 5.
RTNC Button 3, time out control for voice connection.
SDNC Button 3, DTMF number to send.
SDDC Button 3, delay for DTMF number to send.
TZSC Button 3, time zone start period.
TZEC Button 3, time zone end period.
DTN1 Button 4, Telephone number 1.
DTN2 Button 4, Telephone number 2.
DTN3 Button 4, Telephone number 3.
DTN4 Button 4, Telephone number 4.
DTN5 Button 4, Telephone number 5.
RTND Button 4, time out control for voice connection.
SDND Button 4, DTMF number to send.
SDDD Button 4, delay for DTMF number to send.
TZSD Button 4, time zone start period.
TZED Button 4, time zone end period.
ETN1 Button 5, Telephone number 1.
ETN2 Button 5, Telephone number 2.
ETN3 Button 5, Telephone number 3.
ETN4 Button 5, Telephone number 4.
ETN5 Button 5, Telephone number 5.