Controls 58-C0181/DGT - UNIT Menu; STRENGTH Menu

Manuale di Istruzione
Instruction Manual
04/02/2015 58-C0181/DGT Rev. 2 EN
20
3.2.1 UNIT menu
It allows you to select the unit of measurement used to calculate and express the measures
of compressive strength. The possible alternatives are N / mm2, MPa, kg / cm2 and psi.
The desired unit is selected when you press the ESC key to return to the MAIN MENU.
Fig. 3-5
3.2.2 STRENGTH menu
Allows you to set various parameters for the calculation of the estimate of compressive
strength from the rebound index.
Fig. 3-6
This menu contains the following items in turn.