Manuale di Istruzione
Instruction Manual
04/02/2015 58-C0181/DGT Rev. 2 EN
44
3.4.2.7 FIRMWARE UPDATE menu
Select the icon . This menu allows installing a new firmware version into the
instrument.
WARNING:
The present menu is reserved to CONTROLS technical personnel. This procedure shall
not be activated unless specifically authorized by the CONTROLS technical personnel.
CONTROLS will not be held responsible for damages caused by the unauthorized use of
these functions. This will also void the warranty.
3.4.2.8 ADVANCED
Not active. Allows performing the instrument calibration.
WARNING:
The present menu is reserved to CONTROLS technical personnel. This procedure shall
not be activated unless specifically authorized by the CONTROLS technical personnel.
CONTROLS will not be held responsible for damages caused by the unauthorized use of
these functions. This will also void the warranty.